3D MODEL DESCRIPTION
After the last incident, the cult of Mortamath chose a better place to fulfill the profane ritual. At the end of the cemetery, the entrance to a darkened path shows a sight for deeper problems. The Dark Ziggurat, a foul place for evil deeds long forgotten by the people, is the perfect place to bring the Necromancer back.
Wanna build this bad boy just like us? You’ll need:
8 – Smaller Wall
12 – Corner
9 - Top Corner 01
9 - Top Corner 02
5 - Channel Floor Final
5 - Channel Floor
2 - Central Channel Floor
34 - Basic Floor
4 - Elephant Skull
2 - Stairs For Second Floor
4 - Second Stairs First Floor
4 - First Stairs First Floor
12 - Wall 01
10 - Wall 04
6 -Wall 03
8 - Wall 02
02 - Entry
150 - OpenLock Clip
1 - Top Skull 01
1 - Top Skul 02
1 - Top Skull 03
1 - Top Skull 04
The assembling process is as simple as falling into the Necromancer’s hands.
- Recommended for Resin Printers and FDM Printers
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.28 mm
- Recommended Layer Height: 0.28 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (Bone Door/Elephant Skull/Top Skull 01/Top Skull 02/ Top Skull 03/ Top Skull04). (use organic/tree supports)
- Build Plate Adhesion: Skirt.
- All other settings must follow your (3D Printer) recommendations
Pre-Supported: Standard STL file version includes all supports (pre-supported).
Solid Model: You must hollow the 3D print model yourself and add the supports as you wish.
Hollow Model: You must add your own supports.
Happy Printing!