3D MODEL DESCRIPTION
I bet it’s mirrors. Or maybe a portal?
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 23 Hours, 50 Minutes (will vary accord to you printer model)
- Approximately Measures: 12x09x03 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, you will need (Brim) only “Pencil Files”
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
