3D MODEL DESCRIPTION
Believe it or not, this fancy hand fan is print-in-place! It's simple as that: just take out of the printer, carefully tear the pieces apart, and fan away. you’ll be a fan of this model in no time.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 08 Hours 21 Minutes
- Approximately Height: 25 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!