3D MODEL DESCRIPTION
What makes this awesome football helmet even more special is that it’s yours. With a customizable label and multicolor option, you have all you need to create the perfect display. This model is already pre supported, so just be careful with the bridging on the interior of the helmet and you’ll have no problems.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 15 Hours 30 Minutes
- Approximately Height: 11 cm
- Remember to REMOVE SUPPORTS under the faceguard.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!