3D MODEL DESCRIPTION
The tree of life was known to hold the world together since the dawn of time. Now, she’s retired and just wants to hang around at your place! Specifically, on your wall.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Huge - 4 Days 03 Hours 59 Minutes
Small - 1 Day 03 Hours 04 Minutes - Approximately Width: Huge - 40 cm
Small- 18 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20 mm/s (First Layer) / 50 mm/s (All the other layers)
- Recommended Initial Layer Height: 0.4 mm
- Recommended Layer Height: 0.20 mm (Huge) / 0.12 mm (Small)
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!