3D MODEL DESCRIPTION
You don’t wear the dragon. The dragon wears you. This desert wyrm helm sits high and proud, like you’ve already claimed the dunes.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor Large - 01 Day, 03 Hours, 19 Minutes* (may vary according to your printer model)
Multiparts Large - 01 Day, 09 Hours, 03 Minutes* (may vary according to your printer model)
Multicolor Large - 03 Days, 21 Hours, 43 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 30 x 21 x 18 cm (Large Type)
Monocolor Medium - 01 Day, 01 Hours, 06 Minutes* (may vary according to your printer model)
Multiparts Medium - 01 Day, 05 Hours, 57 Minutes* (may vary according to your printer model)
Multicolor Medium - 03 Days, 16 Hours, 24 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
- Approximately Height: 27 x 20 x 17 cm (Medium Type)
Monocolor Small - 23 Hours, 03 Minutes* (may vary according to your printer model)
Multiparts Small - 01 Day, 03 Hours, 20 Minutes* (may vary according to your printer model)
Multicolor Small - 03 Days, 11 Hours, 41 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
- Approximately Height: 26 x 19 x 16 cm (Small Type)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue. You will need a cloth strip, elastic band, leather strap, or whatever you find more comfortable to secure your mask. The measurements should be 05 x 01 cm, or if you prefer, you can use a ruler to measure the opening more accurately.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. (Tree Type)
- Build Plate Adhesion: Yes, only on parts with low adhesion on the print bed.
- Others: You will be able to use a more optimized profile.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!