Wyrmbane Shoulder Pad

3D MODEL DESCRIPTION
 

A sturdy shoulder pad inspired by dragon hunters. Bold shapes and draconic details give it a heroic style.

• This STL file is recommended for FDM Printers!
• 3D Printing Time: Monocolor Small - 08 Hours, 11 Minutes* (may vary according to you printer model)                            
                              Monocolor Medium -13 Hours, 04 Minutes* (may vary according to you printer model)
                              Monocolor Large - 13 Hours, 39 Minutes* (may vary according to you printer model)
    
                              Multipart Small - 08 Hours, 07 Minutes* (may vary according to you printer model)
                              Multipart Medium - 12 Hours, 49 Minutes* (may vary according to you printer model)
                              Multipart Large - 13 Hours, 07 Minutes* (may vary according to you printer model)
  
                              Multicolor Small - 01 Day, 01 Hours, 10 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
                              Multicolor Medium - 01 Day, 09 Hours, 34 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
                              Multicolor Large - 01 Day, 11 Hour, 58 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
   
• Approximately Measurements Small: 32 x 10 x 20 cm (Assembled Files)
• Approximately Measurements Medium: 34 x 12 x 22 cm (Assembled Files)
• Approximately Measurements Large: 36 x 14 x 24 cm (Assembled Files)

*Note: Printing time based on a Bambu P1S printer, according to our tests.

ATTENTION: This files requires super glue. 
ATTENTION:You will need a 03 cm wide strap/belt to attach to your body. The length and style are up to you.
    

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.20 mm
• Recommended Layer Height:  0.20 mm
• Others: We use (Archimedean Chords) for finishing the top layers.
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 10% (Gyroid).
• Needs Support: No.
• Build Plate Adhesion: Yes. (Brim Type)
• Others: If you prefer, you can use a more optimized and economical profile of your choice.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
 

Happy Printing!