3D MODEL DESCRIPTION
A dragonslayer-inspired helmet with defined scales and reinforced edges. Solid and unmistakably fantasy.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Multipart Small - 01 Day, 08 Hours, 33 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Multipart Medium - 01 Day, 12 Hours, 10 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Multipart Large - 01 Day, 15 Hour, 52 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
- Approximately Height Small: 32 cm (Assembled Files)
- Approximately Height Medium: 34 cm (Assembled Files)
- Approximately Height Large: 36 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid).
- Needs Support: Yes. (Tree Type) only on parts that have areas with bridges.
- Build Plate Adhesion: Yes. (Brim Type) only on the highest parts and low adhesion on the table.
- Others: If you prefer, you can use a more optimized and economical profile of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!