3D MODEL DESCRIPTION
Simple and basic yet effective, just like your stitches.
This kit contains a yarn bowl and a hook case, which supports hooks from 3 to 9mm. Just switch the adapter inside the case to the hook size you’re using!
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 2 Days, 1 Hours, 35 Minutes (will vary accord to you printer model)
- Approximately Height: Bowl 9,5 cm, Support 16 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes.(Only Bowl)
- Build Plate Adhesion: Brim.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!