3D MODEL DESCRIPTION
Sneak up, strike quietly, and take the win before anyone knows what hit them.
WARNING: This model has a rubber band–powered mechanism, therefore its shooting strength is different from NERF blasters.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor -12 Hours 42 Minutes* (may vary according to you printer model)
Multiparts - 13 Hours 54 Minutes* (may vary according to you printer model)
Stand - 05 Hours 17 Minutes* (may vary according to you printer model) - Approximately length: 29 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
You will need: 5 rubber bands - Mercado Livre | Amazon | Aliexpress
Nerf Ammo - Mercado Livre | Amazon
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 8% (Grid)
- Needs Support: Yes, only on “Body Cover” file.
- Build Plate Adhesion: None.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!