3D MODEL DESCRIPTION
A playable ocarina shaped like a whale, because why not make music a little more magical. Great conversation piece, even better when it actually plays.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 02 Hours 48 Minutes* (may vary according to your printer model)
Multicolor - 11 Hours 22 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 4 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: When painting the mount, paint only the tail section. AVOID the area around the holes and the inner surface, as this may affect the sound.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 3% (Gyroid)
- Needs Support: Yes. Standard (manual) support. Only on the tail.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!