3D MODEL DESCRIPTION
Winding dirt trails connect homes, fields, and forest edges. The stones are uneven, the grass pushes in, and every fork seems to whisper a choice. Nothing grand, just the quiet paths of everyday life.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Day, 10 Hours, 58 Minutes* (may vary according to you printer model)
Multipart - 01 Day, 09 Hours, 16 Minutes* (may vary according to you printer model)
Multicolor - 02 Days, 01 Hours, 30 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximate Measurements: 17 x 40 x 40 cm (assembled parts)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: For better finishes, use the 0.16 or 0.12 profile on your Slicer, but it will take longer, the “Multipart” files requires super glue. More info in “How To Slice” video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. (Tree) only in “Trees-Monocolor” files
- Build Plate Adhesion: Yes. (Brim Ears) only in extremities.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
