Village on the Moon - Table Lamp

3D MODEL DESCRIPTION
 

Where Christmas meets the cosmos. A tiny moonlit village perched on a glowing lunar surface, dreamy, peaceful, and out of this world.

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor - 06 Hours 55 Minutes*  (may vary according to you printer model)
                                Multiparts - 08 Hours 21 Minutes*  (may vary according to you printer model)
                                Multicolor - 09 Hours 28 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
• Approximately Height: 14 cm

Led Candle  -  Amazon    Mercado Livre    Aliexpress

Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.

*Note: Printing time based on a Bambu P1s printer, according to our tests.

 ATTENTION: “Multipart” files requires super glue.

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 5% Gyroid
• Build Plate Adhesion: Brim (only for Houses).
• Others: 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!