3D MODEL DESCRIPTION
This life size battle axe is going to make you feel like a proper viking. It has its own support so you can even hang it on your wall! Let's just not swing it too close to the head, Valhalla can wait a little longer.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 4 Days 01 Hour 40 Minutes
- Approximately Height: 76 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20 mm/s (First Layer) / 50 mm/s (All the other layers)
- Recommended Initial Layer Height: 0.4 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!