3D MODEL DESCRIPTION
A large modular case that connects to a small box via adapter, with card slots, token and pin trays, a card stand, and a miniature display base. Built for complex games that need every component in its place.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor Textured - 01 Day, 21 Hours, 06 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Monocolor Clean - 01 Day, 19 Hours, 57 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors) - Approximately Height: 36 x 25 x 5.5 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This file does not need super glue, but you can use a point of glue to secure the handle.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Brim Type) if your bed print has poor adhesion.
- Others: If the “Cover” file has any alignment issues due to the print flow, scale it by 0.5% or 1.0% in the negative direction for better alignment.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!