3D MODEL DESCRIPTION
The greatest secrets of all America, hidden and stored away for all the years to come. Maybe your secrets aren’t this set in stone but this vault certainly is. This print-in-place model was carefully angled to avoid supports and it’ll store your valuables in plain sight. Try hiding it in between books or clutter for extra discreet effect.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 02 Days 19 Hours 34 Minutes
- Approximately Length : 23 cm
- Use 5mm Neodymium Magnet
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!