3D MODEL DESCRIPTION
A dark, simple crown with sharp clean shapes. Great for dark rulers, mages, or villain builds.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Multipart Small - 11 Hours, 06 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Multipart Medium - 12 Hours, 28 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Multipart Large - 13 Hours, 36 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
- Approximately Measurements Small: 22 x 11 x 12 cm (Assembled Files)
- Approximately Measurements Medium: 24 x 13 x 14 cm (Assembled Files)
- Approximately Measurements Large: 26 x 15 x 16 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This model has a complex piece (Mesh) that, to ensure a proper result, please watch the "How to Slice" video carefully.
ATTENTION: This files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid).
- Needs Support: No.
- Build Plate Adhesion: Yes. (Raft Type) In this model you will have to use raft. Complete info in “How to Slice Video”.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
