3D MODEL DESCRIPTION
Twinkle twinkle little town.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 03 Days, 02 Hours, 25 Minutes (will vary accord to you printer model)
- Approximately Length: 22 cm
- You will need to assemble this product: 01 Rocker Switch (Aliexpress / Amazon / Mercado Livre)
01 LED Strip With 26 cm (Aliexpress / Amazon / Mercado Livre)
01 Wire (Aliexpress / Amazon / Mercado Livre)
01 Jack Input (Aliexpress / Amazon / Mercado Livre)
01 12V Power Supply 1A (Aliexpress / Amazon / Mercado Livre)
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Brim (only on “Door” files).
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
