3D MODEL DESCRIPTION
Two grips, double the boost, absolutely no brakes.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 07 Hours 12 Minutes* (may vary according to you printer model)
Multicolor - 20 Hours 22 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 15 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
*Note: This model was made exclusively for Nintendo Switch 2.
For further assembly information, check our "How to assemble" video.
ATTENTION: “Multipart” files requires super glue.
The "locker" part has a precise fit, and variations may occur depending on the printer, print settings, and filament used. If the fit of this part ends up being too loose or too tight, you can adjust the precision only on the Z-axis height by increasing or decreasing 0.1mm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (on cases only).
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
