Twilight Rest - Headphone Holder

3D MODEL DESCRIPTION

Give your headphones a comfy fungal home. This tiny mushroom stand keeps them organized, off your desk, and always within reach.
 

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Monocolor - 10 Hours 46 Minutes*  (may vary according to you printer model)
                                Multipart - 10 Hours 32 Minutes*  (may vary according to you printer model)
                                Multicolor - 01 Day, 01 Hours, 14 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
• Approximately Height: 25 cm (assembled files)
  
   

*Note: Printing time based on a Bambu P1S printer, according to our tests.

ATTENTION: This files requires super glue.
                

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.20 mm
• Recommended Layer Height:  0.20 mm
• Others: We use (Archimedean Chords) for finishing the top layers.
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 10% (Gyroid) 
• Needs Support: No.
• Build Plate Adhesion: No.
• Others: 
  
   

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!