3D MODEL DESCRIPTION
This awesome desk organizer is printed on an angle to avoid the need of supports. Such acute idea! Print it and use it with or without the wedge, either for pencils and sticky notes, for your house plants, or anything else you’d like. Follow your imagination and show us the results!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 10 Hours 15 Minutes
- Approximately Heigth : 17 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!