3D MODEL DESCRIPTION
A torii gate-shaped stand that holds two katanas at once. It brings an unmistakable piece of Japanese culture into any shelf or desk setup.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor - 11 Hours, 45 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
- Approximately Height: 28 x 18 x 10 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes, (Tree Slim)
- Build Plate Adhesion: Yes, (Manual Brim)
- Others: You can scale it up or down depending on the size of your katana's scabbard, while staying within the print area of your 3D printer.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!