3D MODEL DESCRIPTION
The wise man once said: ensure your model needs no supports by cutting it in three pieces with easy assembly, and let your subscribers use their creativity for the uses of this controller holder. And that’s what we did! What a beautiful speech.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 2 Days 15 Hours 59 Minutes
- Approximately Height : 35 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!