3D MODEL DESCRIPTION
In the afterlife, time is meaningless. We just use a wall clock to look cool.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 12 Hours 33 Minutes
- Approximately Width : 21 cm
You'll need:
Wall clock engine (Maximum dimension 56mm x 56mm x 16mm) Amazon
Note: If the clock mechanism comes with a metal bracket used to mount the clock on the wall, do not use it.
For the second hand, use the model that comes with the clock engine.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!