3D MODEL DESCRIPTION
That thumb movement you do without thinking just became its own thing. Push it, tilt it, fidget with it anywhere.
- This STL file is recommended for FDM MULTIMATERIAL!
Multi-material is the printing process that uses two or more different materials; in this model, TPU 95A and PLA are used.
- 3D Printing Time:
- Multimaterial - 02 Hours 10 Minutes* (May vary depending on your printer model and the number of colors in your AMS; in this print, we used 02 colors in PLA and 01 colors in TPU)
- Approximately Height: 3 cm
*Nota: Printing time based on a SnapMaker U1 printer, according to our tests.
ATTENTION: Parts to be printed in TPU are indicated in the file name.
ATTENTION: Glue is required for the "Button".
YOU WILL NEED:
Split Key Ring with Chain - Amazon - AliExpress - Mercado Livre
Ring Conector 12 mm - Amazon - AliExpress - Mercado Livre
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
- Others: For "TPU_Internal", use 2 walls and 2% infill.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
