3D MODEL DESCRIPTION
Scoring a 3 point shot has never been that easy! And speaking of easy, this model is support free and super easy to print and assemble. The only problem ahead is getting addicted to scoring these shots.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 02 Days 01 Hour 08 Minutes
- Approximately Dimension: Court - 17 cm x 12,5 cm
Sneaker - 10,5 cm x 6,5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!