3D MODEL DESCRIPTION
Three heads are better than one, especially when all of them are printed at epic scale. This dragon fills the room before you even place it down.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor - 20 Hours, 11 Minutes* (may vary according to your printer model)
Multiparts - 20 Hours, 06 Minutes* (may vary according to your printer model)
Multicolor - 02 Day, 08 Hours, 05 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 05 colors) - Approximately Height: 26 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes, (Painted Brim)
- Others: You can use a more optimized personal slicing profile, but be careful with the fitting parts.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!