3D MODEL DESCRIPTION
A thermoformed Christmas bell with a festive look, perfect for adding a classic holiday touch to your Christmas decorations. A charming 3D print to display around the house or include in your seasonal decor.
- This STL file is recommended for FDM Printers!
- 3D Printing Time:
- Monocolor - 04 Hours 49 Minutes* - 110 g of filament (may vary according to your printer model)
- Multicolor - 05 Hours 04 Minutes* - 114 g of filament (may vary according to your printer model and the amount of colors in your AMS, in this print we've used 02 colors)
- Approximately Height: 14 x 8,5 x 9,5 cm
*Note: Printing time and filament based on a Bambu Lab A1 printer, according to our tests.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.42 mm
- First Layer Line Width: 0.5 mm / 125%
- Average Speed: 50 mm/s (First Layer) / 60–200 mm/s (All the other layers on Bambu Lab) | 20 mm/s (First Layer) / 25–50 mm/s (All the other layers, Ender like)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes (auto brim).
- Others: -For the Bell, use Top shell layers = 0; -For the Bell, use Bottom layers = 0; -For the Bell, use Infill = 15 (test different percentages and pick the one you like best); -For the Bell, use Infill pattern = Honeycomb; -We recommend printing the mold in PETG, as it offers better heat resistance.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
