3D MODEL DESCRIPTION
Riddle me this: a supportless challenge, assemble required / The waiting is long but you shall not be tired /For many trinkets to hold in this Earth /The secret inside is what shows its worth.
Your Pyramid needs some assembling. The instructions are as follows:
- Fit the Chamber into the Still Step.
- Slide Secret Step 1 into the lower slot of the Chamber; from down up, slide the other Secret Steps in order 2, 3 and 4.
- Fit the Stairway between the Chamber and the Still Step, securing it with Clip 8 on the designated location.
- Place the Stairway Rotating on top of the Stairway and fix it with the hinges.
- Assemble the Temple on the Pillar (use glue if necessary) then put the Sword inside it. Use the Pillar Lid Screw to close the Pillar with the Sword inside it.
- Align the steps with the reference mark at the top of the altar, then place the assembled Temple and use the gaps to swivel tem into position so you can lower it into the pyramid.
Your Pyramid Puzzle Box is ready to be deciphered. Ready for this challenge? Decrypt this puzzle to get to the secret*:
The life of a warrior starts at the top,
Once he goes to the right path, he soon must stop.
The next step in life is in combat to fight;
They’ll be twice as old as they’ll go to what’s left of their might.
The third step of the warrior is a right decision;
One battle must be won to ensure their provision.
The magic of the last step in life is to remain almost still
For his life is at the end, and to ascend is his soul’s will.
After death in battle, he’ll rise to the heavens as a hummingbird
As he flies into the sky, he’ll follow the directions he heard:
Once to the east as you will be free,
Twice to the west as soon you will see,
One last time into the western sea –
And you will finally find inside you the heavens’ key.
(*Don’t worry, the answer to the puzzle is in our readme file.)
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 2 Days 06 Hours 52 Minutes
- Approximately Height : 13,5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 30mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!