3D MODEL DESCRIPTION
The forge burns day and night, and Jorren rarely speaks unless you’ve got coin or a blade worth fixing. He’s not much for small talk, but if it’s iron you need, you won’t find better this side of the ridge.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 12 Hours, 35 Minutes* (may vary according to you printer model)
Multipart - 14 Hours, 34 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximate Measurements: 17 x 09 x 11 cm (assembled parts)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
You Will Need Neodymium Magnetic: 08 Size 5x1 mm
ATTENTION: For better finishes, use the 0.16 or 0.12 profile on your Slicer, but it will take longer. The “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. (Tree) only in “Doors Arc” and “Windows Lintel”
- Build Plate Adhesion: Yes. (Brim Ears) only in extremities parts and (Brim) only “Doors” files.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!