3D MODEL DESCRIPTION
Miss Rayna has always run this place with no complications, but since the goblins set camp near the village, business has slowed down a bit. Maybe you should talk to her.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 01 Day, 15 Hours, 39 Minutes* (may vary according to you printer model)
Multipart - 01 Day, 16 Hours, 52 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximate Measurements: 22 x 18 x 22 cm (assembled parts)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
You Will Need Neodymium Magnetic: 16 Size 5x1 mm
ATTENTION: For better finishes, use the 0.16 or 0.12 profile on your Slicer, but it will take longer, the “Multipart” files requires super glue. More info in “How To Slice” video.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. (Tree) only in “Doors Arc” and “Windows Lintel”
- Build Plate Adhesion: Yes. (Brim Ears) only in extremities parts and (Brim) only “Doors” files.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!