3D MODEL DESCRIPTION
Wear this and you can lead a hundred men. Or just print a hundred of these and let them lead themselves.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 03 Days 23 Hours 15 Minutes
- Approximately Height: 43,5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!