3D MODEL DESCRIPTION&nbsp;Fun Fact n. 1: The firehawk is actually an eagle.&nbsp;Fun Fact n. 2: This is not real fire. But this eagle is looking… lit.&nbsp;This eagle is support-free and super simple to print. The assembly is minimal and easy to do.&nbsp; &nbsp;<ul><li>This STL file is recommended for FDM Printers!</li><li>3D Printing Time: 1 Day 28 Hours 59 Minutes</li><li>Approximately Height: 38 cm</li></ul>&nbsp;3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)&nbsp;<ul><li>Line Width/ Nozzle:&nbsp;0.4 mm</li><li>Average Speed:&nbsp;20mm/s (First Layer) / 50mm/s (All the other layers)</li><li>Recommended Initial Layer Height:&nbsp;&nbsp;0.20 mm</li><li>Recommended Layer Height:&nbsp;&nbsp;0.20 mm</li><li>Recommended Perimeters/ Walls: 3.</li><li>Recommended Infill (%):&nbsp;10% (Gyroid)</li><li>Needs Support: No.</li><li>Build Plate Adhesion:&nbsp;Skirt.</li></ul>&nbsp;The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. &nbsp;Happy Printing!

The Firehawk