3D MODEL DESCRIPTION
Time is relative for all astronauts: the ones in space, and the ones exploring other worlds in their hearts.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 23 Hours 15 Minutes
- Approximately Height: 17,8 cm
3D TECHNICAL OVERVIEW
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Bridge Speed (Bambu Slicer): 50 mm/s (Just for the bridge parts) [Check out Readme File for detailed instructions]
- Detect Thin Wall/ Print Thin Wall: Yes.
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 3% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!