3D MODEL DESCRIPTION
An ancient force, the Ancestor's Bite Club strikes with brutal force, combining fluid movement with raw power.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 02 Days, 01 Hours, 66 Minutes (will vary accord to you printer model)
- Attention in this Assembly: Do not change the recommended profiles in the "PDF" if you use "Silk" filament.
- Approximate Measurements: 40 x 20 x 05 cm
- ATTENTION! For “Multiparts” stl, you will need super glue to join some pieces.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Yes. (Brim) only “Rod 3”, “Tooth” and “Thorns” files.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
