3D MODEL DESCRIPTION
Textured ring spinners that slide onto a pen and give your fingers something satisfying to play with. Simple, tactile, and endlessly spinnable.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor Crochet - 51 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors)
Monocolor Heart - 47 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors)
Monocolor Hive - 52 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors)
Monocolor Scales - 53 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors)
Monocolor Stars - 43 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors)
Monocolor Strings - 59 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors) - Approximately Height: 01 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This file does not require super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!