3D MODEL DESCRIPTION
Holds your tea bags in a neat row so you always know what you have and can grab one without any fuss. A simple piece that makes the tea corner feel intentional.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 07 Hours 09 Minutes* (may vary according to your printer model)
- Approximately Height (assembled): 5.5 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
Note: Holds approximately 16 tea bag.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!