3D MODEL DESCRIPTION
Floor mount or wall mount, your call. Set them up as targets and see who can fly through. Every launch gets more interesting with these in the way.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 09 Hours 48 Minutes* (may vary according to your printer model)
- Approximately Height (assembled): 56 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests. Considering only the extendable base, rim and a base
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
