3D MODEL DESCRIPTION
The king of the dinosaurs is back, and this time it is holding a photo. A fun and fearless addition to any shelf or kid's room.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor - 01 Hour, 43 Minutes* (may vary according to your printer model)
Multiparts - 01 Hour, 59 Minutes* (may vary according to your printer model)
Multicolor - 19 Hours, 01 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 07 x 05 x 05 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 2.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes, (Manual Snug) only in “Head” files.
- Build Plate Adhesion: Yes, (Brim) only in “Head” files.
- Others: You can use a more optimized print profile of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
