3D MODEL DESCRIPTION
An elf-inspired shoulder pad with smooth lines and nature-based details. Light, clean, and elegant.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor Small - 08 Hours, 26 Minutes* (may vary according to you printer model)
Monocolor Medium -13 Hours, 05 Minutes* (may vary according to you printer model)
Monocolor Large - 14 Hours, 13 Minutes* (may vary according to you printer model)
Multipart Small - 08 Hours, 03 Minutes* (may vary according to you printer model)
Multipart Medium - 12 Hours, 44 Minutes* (may vary according to you printer model)
Multipart Large - 13 Hours, 49 Minutes* (may vary according to you printer model)
Multicolor Small - 01 Day, 04 Hours, 10 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Multicolor Medium - 01 Day, 13 Hours, 38 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Multicolor Large - 01 Day, 16 Hour, 13 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
- Approximately Measurements Small: 23 x 11 x 17 cm (Assembled Files)
- Approximately Measurements Medium: 29 x 13 x 22 cm (Assembled Files)
- Approximately Measurements Large: 33 x 14 x 23 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue.
ATTENTION:You will need a 03 cm wide strap/belt to attach to your body. The length and style are up to you.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid).
- Needs Support: No.
- Build Plate Adhesion: Yes. (Brim Type)
- Others: If you prefer, you can use a more optimized and economical profile of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
