3D MODEL DESCRIPTION
An elf-style helmet with gentle curves and subtle leaf patterns. Balanced, neat, and iconic.
- This STL file is recommended for FDM Printers!
- 3D Printing Time: Monocolor Small - 01 Days, 23 Hours, 24 Minutes* (may vary according to you printer model)
Monocolor Medium -02 Days, 03 Hours, 39 Minutes* (may vary according to you printer model)
Monocolor Large - 02 Days, 08 Hours, 59 Minutes* (may vary according to you printer model)
Multipart Small - 01 Days, 23 Hours, 12 Minutes* (may vary according to you printer model)
Multipart Medium - 02 Days, 03 Hours, 26 Minutes* (may vary according to you printer model)
Multipart Large - 02 Days, 08 Hour, 46 Minutes* (may vary according to you printer model)
Multicolor Small - 03 Days, 05 Hours, 54 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Multicolor Medium - 03 Days, 11 Hours, 33 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
Multicolor Large - 03 Days, 18 Hour, 26 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
- Approximately Height Small: 28 cm (Assembled Files)
- Approximately Height Medium: 30 cm (Assembled Files)
- Approximately Height Large: 32 cm (Assembled Files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This model has a complex piece (Mesh) that, to ensure a proper result, please watch the "How to Slice" video carefully.
ATTENTION: This files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid).
- Needs Support: Yes. (Tree Type)
- Build Plate Adhesion: Yes. (Brim Type) in “Helmet” files and (Raft Type) In “Mesh” files you will have to use raft. Complete info in “How to Slice Video”.
- Others: If you prefer, you can use a more optimized and economical profile of your choice.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
