Sunforge Spartan

3D MODEL DESCRIPTION
 

Blazing discipline with armor forged for glory… or for swapping around just for fun.

• This STL file is recommended for FDM Printers!
• 3D Printing Time : Spartan 01 - Monocolor - 02 Hours 15 Minutes*  (may vary according to your printer model)
                                                    Multicolor - 10 Hours*  (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors)
                                Spartan 02 - Monocolor - 02 Hours 20 Minutes*  (may vary according to your printer model)
                                                    Multicolor - 12 Hours*  (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
• Approximately Height: 12 cm

*Note: Printing time based on a Bambu P1s printer, according to our tests.

You Will Need: 8x Neodymium Magnets 5mm x 1mm - Mercado Livre | Aliexpress | Amazon    

Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting.

ATTENTION: “Multipart” files requires super glue.             

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 5% (Grid)
• Needs Support: No.
• Build Plate Adhesion: No.

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!