3D MODEL DESCRIPTION
A celestial sun and moon frame holding a crystal ball or glowing sphere at the center. A statement piece for any shelf, printable as a display or a lamp.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 14 Hours 14 Minutes* (may vary according to your printer model)
- Approximately Height: 12 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
ATTENTION: “Multipart” files requires super glue.
YOU WILL NEED:
Clear Crystal Ball - Amazon - AliExpress - Mercado Livre
Bambu LED Kit - Amazon - AliExpress - Mercado Livre - Bambu
3D PRINT SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes. Manual Tree.
- Build Plate Adhesion: Yes. Ear brim.
- Others: Reduce print speed for tall parts.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
