3D MODEL DESCRIPTION
Stick it like a pro! This grip gives you a bubblegum-hold on your controller. No slip-ups, just epic wins.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 3 Hour 40 Minutes* (may vary according to you Approximately Height: 10 cm
*Note: Printing time based on a Bambu P1S printer, according to our tests.
*Notice: Some overhang will be visible. If your equipment is calibrated and properly adjusted, this condition will be minimal. We recommend using support only on the bridge below the controller. Using support in other areas of the model is at your discretion.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
