3D MODEL DESCRIPTION
Go full throttle with one wheel, one driver, zero shame.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Multiparts - 19 Hours 04 Minutes* (may vary according to you printer model)
Multicolor - 01 Day, 02 Hours 52 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 13 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
*Note: This model was made exclusively for Nintendo Switch 2.
For further assembly information, check our "How to assemble" video.
ATTENTION: “Multipart” files requires super glue.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (tree).
- Build Plate Adhesion: No.
- Others:
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
