Last Update 2025/08/29
3D MODEL DESCRIPTION
Blow off some steam by decompressing steampunk style.
Want to customize your bottle dispenser lable? Click here: LINK
ASSEMBLE INSTRUCTIONS CLICK HERE: LINK
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 03 Days 02 Hours 38 Minutes (will vary accord to you printer model)
- Approximately Height: 27cm
WHAT YOU'LL NEED
1 - 1x Faucet ½ 304 Stainless Steel
2 -1x 1/2" Male Thread Nipple Union 304 Stainless Pipe Fitting
3 - 1x 304 Stainless Steel adapter 1/2" Female Thread Fitting Tee
4 - 1x 1"-1/2" (DN25-DN15) Female Thread 304 Stainless Steel Reducing
5 - Male Flange Hex Square End Plug Cap 304 Stainless Steel
**SUGGESTIONS LINKS**
You can find the materials at your preferred plumbing store.
Faucet ½ 304 Stainless Steel
1/2" Male Thread Nipple Union 304 Stainless Pipe Fitting
304 Stainless Steel adapter 1/2" Female Thread Fitting Tee
1"-1/2" (DN25-DN15) Female Thread 304 Stainless Steel Reducing
Male Flange Hex Square End Plug Cap 304 Stainless Steel
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.12 mm
- Recommended Layer Height: 0.12 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!