3D MODEL DESCRIPTION
A streamlined solution for storing and charging, combining style with practicality.
Liked what you see? The models were designed by @simiu3D
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 09 Hours 33 Minutes (will vary accord to you printer model)
- Approximately Height: 10 cm
Attention: This model is designed to Apple Magsafe Wireless Charger. Available in two version;
Choose the old version of the Magsafe top file, if you have Original MagSafe Charger (2020) Qi standard compatibility for older iPhones (8 or later).
Choose the new version of the Magsafe top file, if you have Updated MagSafe Charger (2024/2025) for iPhone 16/17 or devices with Qi2.2/Qi2 compatibility.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: No.
- Build Plate Adhesion: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
