3D MODEL DESCRIPTION
Swimming along the riverbed, this hungry piranha is eager to turn the hand that feeds her into her next meal. Who wants to give it a shot? Mind your fingers!
Assemble your carnivore pet fish as follows:
1 - Place "Piranha_Spring_01" and "Piranha_Gear" on "Piranha_Jaw".
2 - Place "Piranha_Spring_02" on the left side of "Piranha_Tooth_Trigger", and then fit the piece in its proper place on "Piranha_Jaw".
3 - Place "Piranha_Tongue" over the assembled mechanism on "Piranha_Jaw".
4 - Fit "Piranha_Axle" on the side of "Piranha_Jaw", joining it to "Piranha_Disk" and finally fitting the other side of "Piranha_Jaw". (The pin of "Piranha_Disk" should be facing downwards, thus joining "Piranha_Gear".)
5 - Attach "Piranha_Head_Tooth" to "Piranha_Head".
6 - Attach "Piranha_Head" to "Piranha_Axle" with "Piranha_Jaw" already attached.
7 - Your piranha bites now! Good luck!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 1 Day 10 Hours 24 Minutes
- Assembly view HERE
3D PRINT FILE SETTINGS
- Average Speed: 50 mm/s
- Recommended Layer Height: 0.20 mm( head and jaw ) / 0.12 mm ( all the other parts)
- Recommended Perimeters: 3.
- Recommended Infill (%): 5%
- Needs Support: No.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Hand-Painted by: Thomas Padilha
Happy Printing!