3D MODEL DESCRIPTION
While you sleep, someone scans the skies. A soft projection turns your ceiling into a night full of twinkles and possibilities.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 15 Hours, 48 Minutes* (may vary according to you printer model)
Multipart - 15 Hours, 37 Minutes* (may vary according to you printer model)
Multicolor - 02 Days, 22 Hours, 05 Minutes* (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 07 colors) - Approximately Height: 20 cm (assembled files)
*Note: Printing time based on a Bambu P1S printer, according to our tests.
ATTENTION: This files requires super glue. We do not recommend the use of SILK filaments for this piece. The piece contains fittings and joints, and the SILK filament does not have the necessary physical properties to ensure the required strength for the piece. The use of Silk-Type filament is at your discretion. You can weld the internal cables of the light or simply insulate them with electrical tape. More information in the "How to" videos.
You Will Need: Socket/Conector T10 - Amazon - AliExpress - Mercado Livre
LED Lamp T10 - Amazon - AliExpress - Mercado Livre
Electrical Plug - Amazon
Power Supply - Amazon
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.16 mm
- Recommended Layer Height: 0.16 mm
- Others: We use (Archimedean Chords) for finishing the top layers.
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 10% (Gyroid)
- Needs Support: Yes, (Tree Type) only in “Base” and “Hands” files.
- Build Plate Adhesion: Yes. (Brim) only in the smallest parts with low bed adhesion.
- Others: For small “Multipart” use a 0.08 mm profile for better finishing.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
