3D MODEL DESCRIPTION
No wall? No problem. This freestanding setup holds drawers and modules steady on any flat surface, from a balcony workbench to a cluttered studio corner.
- This STL file is recommended for FDM Printers!
- 3D Printing Time : Monocolor - 03 Days 07 Hours 25 Minutes* (may vary according to you printer model)
- Approximately dimensions (assembled): 60 x 10 x 43,5 cm
*Note: Printing time based on a Bambu P1s printer, according to our tests.
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.2 mm
- Recommended Layer Height: 0.2 mm
- Recommended Perimeters/ Walls: 3.
- Recommended Infill (%): 5% (Gyroid)
- Needs Support: Yes (Only in the male socket of the “board” files).
- Build Plate Adhesion: No.
- Others: To improve the surface finish, use the “monotonic” top surface pattern on “board” parts.
Tip: On flat, large parts, you can use the brim ears / mouse ears on the corners to prevent warping.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!